Professional Electrostatic Disinfection Services for Commercial Premises
Electrostatic disinfection is a specialist surface-treatment service that can be used alongside professional cleaning when a workplace, commercial building or shared environment requires a more structured level of surface disinfection.
Citywide Cleaning Company provides electrostatic disinfection and commercial deep cleaning support for offices, managed workspaces, retail premises, schools, communal buildings, hospitality environments and other suitable business premises.
The service is planned around the building, the surfaces to be treated, the reason for treatment, the selected disinfectant, access arrangements and the manufacturer’s application instructions. We do not use a single standard process for every property because different products, surfaces and business environments require different controls.
Electrostatic application does not replace physical cleaning. Dirt, dust, grease and organic matter should normally be removed before a disinfectant is applied. The service may therefore be combined with our commercial deep cleaning services where the premises first requires a more intensive clean.
London businesses can connect this specialist service with our wider Office Cleaning London coverage. We also support suitable commercial premises in selected locations, including Manchester, Birmingham, Liverpool and Leeds.
Request an Electrostatic Disinfection Quote
What Is Electrostatic Disinfection?
Electrostatic disinfection is a method of applying a suitable liquid disinfectant to compatible environmental surfaces. The application equipment gives the liquid droplets an electrical charge as they pass through the sprayer nozzle.
The charged droplets are attracted to suitable surfaces, helping the liquid distribute across exposed areas more evenly than an uncontrolled conventional spray. This can be particularly useful when treating compatible hard, non-porous surfaces with irregular shapes, edges or areas that are difficult to reach through direct manual application alone.
Electrostatic spraying is an application method. It is not itself a disinfectant, cleaning chemical or guarantee of effectiveness.
The outcome depends on several factors:
✅ The disinfectant product being used
✅ Whether electrostatic application is permitted for that product
✅ The organisms covered by the product instructions
✅ Correct dilution and preparation
✅ The type and condition of the surface
✅ The amount of product applied
✅ The required wet-contact or dwell time
✅ Pre-cleaning of visibly dirty surfaces
✅ Temperature, ventilation and site conditions
✅ Following the manufacturer’s instructions
A disinfectant cannot perform properly if it is applied incorrectly, wiped away too soon or used on a surface or organism for which it was not intended.
For this reason, Citywide does not rely on blanket statements that one treatment will eliminate every type of bacterium, virus, fungus or other microorganism. Any efficacy statement must relate to the specific product, concentration, application method, organism and contact time.
Electrostatic Disinfection and Deep Cleaning Are Not the Same
Deep cleaning and electrostatic disinfection serve different purposes. They may be used together, but one should not be confused with the other.
Commercial Deep Cleaning
Deep cleaning focuses on physically removing:
✅ Dirt and dust
✅ Grease and food residue
✅ Marks and surface build-up
✅ Scale and washroom deposits
✅ Debris in corners and edges
✅ Contamination that can interfere with disinfection
It normally involves detailed manual cleaning of surfaces, fixtures, floors, kitchens, washrooms, furniture and other agreed areas.
Electrostatic Disinfection
Electrostatic disinfection focuses on applying a suitable disinfectant to compatible surfaces after the necessary cleaning has taken place.
Its purpose is to improve application coverage across the selected treatment area while allowing the disinfectant to remain on the surface for the required contact time.
Why the Correct Order Matters
Applying disinfectant over dirt, dust or heavy surface residue can reduce the quality of the treatment. In many situations, the appropriate sequence is:
✅ Remove waste and unnecessary items
✅ Clean visibly dirty surfaces
✅ Complete any required deep cleaning
✅ Allow surfaces to reach the appropriate condition
✅ Apply the selected disinfectant correctly
✅ Maintain the required wet-contact time
✅ Follow ventilation and re-entry instructions
Businesses that require intensive physical cleaning without electrostatic treatment should use our main Deep Cleaning Services page.
When May Electrostatic Disinfection Be Appropriate?
Electrostatic disinfection is not automatically required for every office or commercial property. It should be considered according to the premises, the reason for treatment, the surfaces involved and the client’s hygiene or risk-management requirements.
The service may be appropriate:
✅ After a workplace has completed an intensive deep clean
✅ Before reopening a previously closed commercial premises
✅ Before employees or tenants occupy a prepared workspace
✅ As part of an agreed infection-control response plan
✅ Following a client-led review of hygiene-sensitive areas
✅ In high-use shared areas with many compatible touchpoints
✅ Before an important event, inspection or business reopening
✅ As part of a planned periodic hygiene programme
✅ When a facilities manager requires documented specialist treatment
✅ After a suitable risk assessment identifies a need for enhanced surface disinfection
The service should not be used as a substitute for regular office cleaning, hand hygiene, appropriate ventilation, waste management or the routine manual cleaning of frequently touched surfaces.
Commercial Premises We Can Support
Electrostatic disinfection may be suitable for different types of commercial and professionally managed premises, subject to a review of the site, the surfaces and the proposed treatment.
We can assess requirements for:
✅ Corporate offices and headquarters
✅ Small and medium-sized offices
✅ Managed workspaces and serviced offices
✅ Co-working environments
✅ Commercial buildings
✅ Reception areas and shared lobbies
✅ Retail premises and showrooms
✅ Schools and education premises
✅ Training centres
✅ Hotels and suitable hospitality areas
✅ Gyms and fitness facilities
✅ Property-management portfolios
✅ Communal areas in managed buildings
✅ Non-clinical administrative areas in healthcare-related premises
✅ Multi-site business premises
Clinical environments, laboratories, food-production areas and other regulated premises may require additional protocols, specialist authorisation or a different service provider. These requirements must be discussed before a quotation is issued.
What Is Included in Our Electrostatic Disinfection Service?
The exact service is agreed after reviewing the building and the purpose of the treatment. Depending on the premises, the work may include the following stages.
Site and Requirement Review
We establish why the treatment is required, which areas are involved, how the building is used and whether any special site procedures apply.
This review may cover:
✅ Type and size of premises
✅ Occupancy and operating hours
✅ Priority treatment areas
✅ Surface types and compatibility
✅ Sensitive equipment and materials
✅ Access, alarms and security procedures
✅ Ventilation arrangements
✅ Required completion time
✅ Re-entry restrictions
✅ Existing cleaning arrangements
Pre-Cleaning Assessment
Electrostatic disinfection should not normally be applied over visibly dirty surfaces. We therefore identify whether routine cleaning or a more intensive deep clean is required before treatment.
Where the premises needs a substantial reset, the service can be combined with:
✅ Office deep cleaning
✅ Kitchen deep cleaning
✅ Washroom deep cleaning
✅ Touchpoint cleaning
✅ Floor and edge cleaning
✅ Internal glass cleaning
✅ Communal-area cleaning
✅ Waste removal within the agreed scope
Preparation of the Treatment Area
Before application, occupants and unauthorised persons are normally excluded from the treatment area. Items that should not be sprayed are removed, covered or identified for a different cleaning method.
Preparation may include:
✅ Removing loose papers and exposed documents
✅ Protecting sensitive materials
✅ Identifying electronic equipment
✅ Removing uncovered food and drink
✅ Reviewing food-contact surfaces
✅ Securing rooms and access points
✅ Displaying temporary access restrictions
✅ Confirming ventilation and re-entry arrangements
Controlled Electrostatic Application
The selected product is applied to the agreed compatible surfaces using suitable equipment and in accordance with the relevant instructions.
The operative considers:
✅ Application distance
✅ Spray pattern and coverage
✅ Surface wetness
✅ Product volume
✅ Room layout
✅ Equipment and material sensitivity
✅ Avoidance of over-application
✅ Required contact time
Contact Time and Area Control
The treated surfaces must remain wet for the contact time stated for the selected product and intended treatment. Wiping a disinfectant away too early may prevent it from performing as intended.
During this stage, access to the area remains controlled according to the product instructions and site procedure.
Ventilation and Re-Entry
The premises is ventilated where required, and occupants should not return until the applicable re-entry conditions have been satisfied.
The required period depends on the product, application method, room conditions and manufacturer instructions. It should not be replaced with a generic promise that every room is immediately ready for occupation.
Completion Review
After treatment, the service may be reviewed against the agreed scope. Any exclusions, limitations, inaccessible areas or surfaces treated by an alternative method can be recorded for the client.
Surfaces Commonly Considered for Treatment
Electrostatic disinfection is generally most relevant to compatible hard, non-porous environmental surfaces. The suitability of each surface must still be checked against the product and equipment instructions.
Areas considered for treatment may include:
✅ Door handles and push plates
✅ Suitable desks and work surfaces
✅ Meeting-room tables
✅ Reception counters
✅ Suitable chair frames and hard surfaces
✅ Handrails and banisters
✅ Lift buttons and suitable panels
✅ Light switches
✅ Washroom fixtures
✅ Kitchen worktops
✅ Suitable cupboard exteriors
✅ Hard partitions and dividers
✅ Compatible shared equipment exteriors
✅ Other agreed high-touch surfaces
Sensitive Surfaces and Equipment
No blanket assumption should be made that electrostatic spraying is safe for every electronic device, fabric, paper product, unfinished material or specialist surface.
Items requiring particular care include:
✅ Computers and monitors
✅ Keyboards and telephones
✅ Printers and electrical controls
✅ Medical and technical equipment
✅ Unsealed wood
✅ Paper documents
✅ Artwork and specialist finishes
✅ Soft furnishings
✅ Food-contact surfaces
✅ Items affected by moisture
These surfaces may be excluded, protected or cleaned manually using a more suitable method. Direct application to electrical or specialist equipment should take place only where the relevant instructions and equipment requirements permit it.
Our Electrostatic Disinfection Process
1. Initial Enquiry
Tell us about the premises, location, reason for treatment, approximate size and required completion date.
2. Site Review
We review the layout, surface types, occupancy, access restrictions, sensitive materials and whether deep cleaning is needed first.
3. Written Scope
We prepare a clear scope showing the areas included, preparation requirements, exclusions and any additional cleaning work.
4. Product and Method Review
A suitable product and application method are selected according to the intended use, surfaces and available instructions. Relevant safety information and control requirements are reviewed before work begins.
5. Area Preparation
The treatment zone is cleared of occupants, and sensitive items are removed, covered or excluded from spraying.
6. Pre-Cleaning
Visibly dirty surfaces are cleaned. Where required, a wider commercial deep clean is completed before disinfection.
7. Electrostatic Application
The disinfectant is applied to the agreed compatible surfaces using controlled equipment and the specified application procedure.
8. Contact Time and Re-Entry
The area remains controlled for the required contact, ventilation and re-entry period.
9. Completion and Handover
The completed service is reviewed against the agreed scope, and any relevant limitations or excluded areas are communicated.
Arrange a Site Review and Written Quote
Responsible Product Use and Workplace Safety
Electrostatic application involves the controlled use of a chemical product in a workplace. The service must therefore be planned carefully rather than treated as ordinary uncontrolled spraying.
Our approach can include:
✅ Reviewing product safety information
✅ Following COSHH-related control requirements
✅ Confirming that the intended application method is suitable
✅ Assessing surface compatibility
✅ Using the correct dilution or ready-to-use formulation
✅ Following the required contact time
✅ Providing suitable operative training and briefing
✅ Using appropriate personal protective equipment
✅ Excluding unauthorised people from the treatment area
✅ Following ventilation and re-entry requirements
✅ Avoiding incompatible chemical mixtures
✅ Protecting sensitive equipment and materials
Products must never be mixed unless the manufacturer specifically permits it. Increasing the concentration beyond the stated instructions does not automatically make a treatment more effective and may create unnecessary risks.
What Electrostatic Disinfection Does Not Mean
Clear expectations are particularly important with specialist disinfection services. Electrostatic treatment does not mean:
✅ That the premises has been sterilised
✅ That every microorganism has been eliminated
✅ That surfaces will remain protected permanently
✅ That future contamination cannot occur
✅ That routine office cleaning is no longer needed
✅ That hand hygiene and ventilation are unnecessary
✅ That the same product can be used on every surface
✅ That occupants can remain in the treatment area
✅ That people, animals or exposed food should be sprayed
✅ That every electronic item can be treated directly
✅ That electrostatic application is suitable for every building
✅ That a generic percentage claim applies to every organism
Surfaces can be contaminated again after treatment through normal occupation, touch, respiratory droplets, deliveries, equipment movement and other workplace activity. A specialist treatment should therefore sit within a wider cleaning and hygiene plan.
Electrostatic Disinfection Services in London
Citywide Cleaning Company provides electrostatic disinfection and commercial deep cleaning support for suitable offices and business premises across London.
London buildings can present particular operational challenges, including restricted loading, controlled access, security desks, lift-booking procedures, densely occupied floors and limited treatment windows. These requirements are reviewed before work is scheduled.
Businesses can combine the service with our wider London office cleaning services, including routine office cleaning, deep cleaning, washroom hygiene and periodic specialist support.
Central London and the West End
Explore local cleaning coverage for:
✅ Office Cleaning Marylebone and Harley Street
✅ Office Cleaning Oxford Street and the West End
✅ Office Cleaning Fitzrovia and Bloomsbury
✅ Office Cleaning Holborn and Covent Garden
✅ Office Cleaning Old Street and Shoreditch
City of London
✅ Office Cleaning Liverpool Street, Aldgate, Spitalfields and Barbican
West and South West London
✅ Office Cleaning Chelsea and Fulham
✅ Office Cleaning Sloane Square, Belgravia and Kings Road
East London and Docklands
✅ Office Cleaning Canary Wharf, Stratford and East London
South East London
✅ Office Cleaning Greenwich, Woolwich and Lewisham
For wider coverage, site requirements and postcode enquiries, visit our principal Office Cleaning London page.
Electrostatic Disinfection Across Other UK Locations
Citywide also supports suitable commercial premises in selected business locations outside London. Availability depends on the type of building, project size, required treatment, access and mobilisation requirements.
Manchester
Businesses across Manchester City Centre, Spinningfields, Deansgate, the Northern Quarter, Ancoats and Salford Quays can review our Office Cleaning Manchester coverage.
Birmingham
Commercial premises across Birmingham City Centre, Colmore Business District, Brindleyplace, Digbeth and nearby business areas can visit our Office Cleaning Birmingham page.
Liverpool
Businesses in Liverpool City Centre, the Commercial District, Baltic Triangle, Ropewalks and the Knowledge Quarter can explore our Office Cleaning Liverpool coverage.
Leeds
Commercial cleaning support may be arranged across Leeds City Centre, Wellington Place, Holbeck, South Bank, Park Square and surrounding business locations. Visit our Office Cleaning Leeds page.
You can also view our complete cleaning service locations directory.
Why Businesses Choose Citywide Cleaning Company
Citywide Cleaning Company has supported offices and commercial premises since 2004. Specialist cleaning requires clear planning, realistic claims and an agreed scope rather than a one-size-fits-all treatment.
Depending on the service requirement, we can provide:
✅ A site-specific requirement review
✅ A written cleaning and disinfection scope
✅ COSHH-trained cleaning operatives
✅ DBS-checked cleaning personnel
✅ Review of sensitive areas and materials
✅ Controlled access during treatment
✅ Flexible daytime, evening or weekend scheduling
✅ Coordination with building management
✅ A named contact for the service
✅ Electrostatic disinfection combined with deep cleaning
✅ Support for single and multi-site organisations
✅ A written quotation before work begins
Our objective is to provide a properly scoped commercial service while avoiding exaggerated or unsupported promises about surface treatment.
Related Commercial Cleaning Services
Deep Cleaning Services
Where the primary requirement is to remove dirt, grease, dust, scale and accumulated build-up, use our commercial deep cleaning services.
Professional Office Cleaning
Routine cleaning helps maintain the premises after a specialist treatment. Explore our professional office cleaning services.
Commercial Cleaning
Managed buildings and larger business premises can review our commercial cleaning services.
Washroom Hygiene
For continuing washroom cleaning, periodic deep cleaning and hygiene support, visit our washroom hygiene services.
Managed Workspace Cleaning
Serviced offices, co-working providers and flexible workspace operators can use our managed workspace cleaning services.
School Cleaning
Education providers can review our school cleaning services for routine and periodic cleaning requirements.
Medical Centre Cleaning
Healthcare offices, clinics and non-hospital medical premises can explore our medical centre cleaning services. Specialist clinical decontamination requirements must be discussed separately.
Frequently Asked Questions
Does Electrostatic Disinfection Replace Deep Cleaning?
No. Electrostatic disinfection applies a disinfectant to compatible surfaces. Deep cleaning physically removes dirt, dust, grease, scale and surface build-up. A deep clean may be required before electrostatic treatment.
Is Electrostatic Disinfection the Same as Fogging?
No. The terms are sometimes used incorrectly as though they mean the same thing. Electrostatic equipment charges liquid droplets before they reach the surface. Other fogging or misting equipment may use a different application process. The product and equipment instructions must permit the selected method.
Does Electrostatic Disinfection Kill 99.99% of Germs?
A universal percentage claim should not be applied to every product, organism, surface or treatment. Any claim must be supported by the instructions and evidence for the specific disinfectant, concentration, application method, target organism and contact time.
Can Electrostatic Disinfection Be Used Against Coronavirus?
A disinfectant may only be described as effective against a particular virus where the specific product information supports that claim and it is used according to the stated instructions. Electrostatic application itself does not create or extend a product’s approved efficacy claims.
Can Employees Remain in the Office During Treatment?
The treatment area will normally need to be unoccupied during application. Re-entry depends on the selected product, equipment instructions, ventilation and site procedure. These requirements are confirmed before the service begins.
Is Electrostatic Disinfection Safe Around Computers?
No general promise should be made that spraying is suitable for every computer, monitor, keyboard or electrical device. Equipment may need to be covered, excluded or cleaned manually. Direct application should only take place where the relevant product, equipment and manufacturer instructions permit it.
Can You Treat Soft Furnishings and Carpets?
Only where the selected product specifically permits use on the material concerned. Many electrostatic treatments are primarily intended for compatible hard, non-porous surfaces. Carpets and upholstery may require a separate professional cleaning method.
Can Food-Contact Surfaces Be Treated?
This depends on the selected product and its instructions. Some products may require a potable-water rinse after use on food-contact surfaces. Exposed food and drink must be removed or protected before treatment.
How Long Does the Treatment Take?
The duration depends on the floor area, number of rooms, furniture layout, pre-cleaning requirements, surface types and application procedure. The contact, ventilation and re-entry period must also be considered.
How Often Is Electrostatic Disinfection Needed?
There is no universal schedule suitable for every business. Frequency should reflect the premises, occupancy, level of use, hygiene requirements and the reason for treatment. Some clients use it as a one-off service, while others include it in a risk-based periodic cleaning programme.
Can You Provide Electrostatic Disinfection in London?
Yes. We can assess suitable commercial premises across Central London, the City, Canary Wharf, the West End, East London, West London, South East London and other Greater London business areas. Visit our Office Cleaning London page for local coverage.
Do You Cover Other UK Cities?
We support selected commercial requirements in Manchester, Birmingham, Liverpool and Leeds. Availability depends on the project, site type, scope and mobilisation requirements.
Do You Provide a Certificate After Treatment?
We can provide appropriate service or completion documentation describing the agreed work. This should not be presented as proof that a building is sterile, permanently protected or free from all microorganisms.
How Much Does Electrostatic Disinfection Cost?
The price depends on the size and layout of the premises, required pre-cleaning, number of treatment areas, access, timing, selected product and safety controls. We provide a tailored quotation based on the actual scope.
Request an Electrostatic Disinfection Quote
Citywide Cleaning Company can assess whether electrostatic disinfection is suitable for your premises and whether deep cleaning should be completed before treatment.
When contacting us, please provide:
✅ The address and location of the premises
✅ The type of commercial property
✅ The approximate floor area
✅ The reason treatment is required
✅ The areas you want assessed
✅ Your preferred completion date
✅ Your normal occupancy and operating hours
✅ Details of sensitive equipment or materials
✅ Any building-management or access restrictions
✅ Whether routine or deep cleaning is also required
We will review the requirement and prepare a written quotation based on the proposed scope, access and treatment arrangements.